– 5 –
LEAVE HOME(LH) OPERATION
■ Prevent the room temperature from falling too much by setting temperature at 10 deg automatically
when no one is at home.
Hold down the HEATING Button for 3-5 seconds to start
Leave Home operation.
• Room temperature is automatically set at 10 deg.
• "
", " LH ", " ", " ", is displayed on the LCD.
START
Press the (STOP) button.
Change to other Operation Mode.
CANCEL
NOTE
• During Leave Home operation, fan speed and horizontal air defl ector position cannot be changed.
L.H
To Next Page
Loading...
