Hitachi RAS-10HNPE User Manual (English)

Questions and Answers:

C
Carla HoldenAug 8, 2025
Why is my Hitachi RAS-10HNPE not cooling or heating well?
- M
  Marcus SmithAug 8, 2025
  If your Hitachi Air Conditioner isn't cooling or heating properly, there are several things you can check: * Ensure that nothing is blocking the airflow of either the outside or inside units. * See if there are too many heat sources in the room. * Inspect the air filter to see if it's clogged with dust. * Make sure that all doors and windows are closed properly. * Clean the air filter and panels, and ensure good ventilation. * Verify that the temperature setting is within the operating range.
S
sarahpadillaAug 14, 2025
What to do if there is dew on the air panel of my Hitachi Air Conditioner?
- M
  Mark JohnstonAug 14, 2025
  Check that the four louver positions at the air outlet are in the same position on your Hitachi Air Conditioner.
S
shunterAug 20, 2025
Why is my Hitachi RAS-10HNPE making sounds from the indoor unit heat exchanger?
- B
  Blake WilliamsonAug 20, 2025
  During cooling operation, a sound may be heard from the indoor unit heat exchanger due to water freezing or melting in your Hitachi Air Conditioner.
E
Emma LaraAug 27, 2025
Why does my Hitachi RAS-10HNPE Air Conditioner have a hot start during heating operation?
- J
  Jonathan ParsonsAug 27, 2025
  During heating operation, to prevent cold air discharge, the fan speed of your Hitachi Air Conditioner is automatically controlled, starting from a slow speed and adjusting to the set speed based on the discharge air temperature. During this time, the louver is fixed horizontally.
M
Marvin GreeneSep 1, 2025
What to do if the swing louver's position is abnormal in my Hitachi RAS-10HNPE Air Conditioner?
- G
  ghillSep 1, 2025
  Check that the four louver positions at the air outlet are in the same position on your Hitachi Air Conditioner.

Hitachi RAS-10HNPE Specifications

General

Type	Split System
Heating Capacity	3.2 kW
Power Supply	220-240V, 50Hz
Refrigerant	R410A
Indoor Unit Weight	9 kg
Air Flow (Indoor Unit)	500 m³/h

Summary

PART I - OPERATION

1 GENERAL INFORMATION

Provides general notes, environmental information, and safety symbols for the air conditioning system.

2 SAFETY

Details applied symbols (Danger, Caution, Note) and essential safety precautions for system operation.

3 PRODUCT GUIDE

Explains the model classification for IVX and ES outdoor units, detailing their components and series.

4 IMPORTANT NOTICE

Highlights critical information including system design, safety warnings, and operating temperature limits.

5 TRANSPORTATION AND HANDLING

Provides guidelines for safely transporting and handling the outdoor units, including weight information.

6 BEFORE OPERATION

Outlines essential steps and precautions to take before operating the air conditioning system.

7 REMOTE CONTROLLER

Advises on the use of optional PC-ART or PC-ARF remote controllers for system operation.

8 AUTOMATIC CONTROLS

Describes the automatic functions of the system, including protection guards and defrost cycles.

9 BASIC TROUBLESHOOTING

Offers guidance on identifying and resolving common operational issues and abnormal sounds or conditions.

PART II - INSTALLATION

10 NAME OF PARTS

Illustrates and lists the various parts of the outdoor units for identification during installation.

11 REFRIGERANT CYCLE

Details the refrigerant cycle diagrams for different models, showing component connections and flow.

12 UNITS INSTALLATION

Covers outdoor unit installation, including placement, space requirements, and mounting considerations.

13 REFRIGERANT PIPING & REFRIGERANT CHARGE

Explains piping materials, suspension, connection, charging procedures, and refrigerant length specifications.

14 DRAIN PIPING

Provides instructions for connecting the drain piping to the outdoor unit's drain boss for water discharge.

15 ELECTRICAL WIRING

Covers general electrical checks, wiring connections, wire sizes, and DIP switch settings for proper installation.

16 TEST RUNNING

Details procedures for performing test runs from both remote control and outdoor unit sides.

17 SAFETY SUMMARY & CONTROL DEVICE SETTING

Summarizes compressor and fan motor protection settings and safety devices for system control.

18 TROUBLESHOOTING

Lists alarm codes, their indications, and potential causes for troubleshooting system malfunctions.

Related product manuals

Hitachi RAS-10HNCE

50 pages

Hitachi RAS-10HNBRMQ1