Hitachi RAS-10HNCE User Manual

50 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

UTOPIA IVX PREMIUM / IVX STANDARD Series

RAS-(3-10)H(V)NP(1)E / RAS-(8-10)HNCE

UTOPIA ES Series

RAS-4H(V)RNS3E

INSTALLATION AND OPERATION MANUAL

Questions and Answers:

J
Jonathan RochaAug 8, 2025
Why is my Hitachi RAS-10HNCE Air Conditioner not cooling or heating well?
- E
  ejonesAug 8, 2025
  If your Hitachi Air Conditioner isn't cooling or heating properly, there are several things you can check: * Ensure that nothing is blocking the airflow of either the outside or inside units. * See if there are too many heat sources in the room. * Inspect the air filter to see if it's clogged with dust. * Make sure that all doors and windows are closed properly. * Clean the air filter and panels, and ensure good ventilation. * Verify that the temperature setting is within the operating range.
R
rpetersenAug 14, 2025
What to do if there is dew on the air panel of my Hitachi RAS-10HNCE?
- K
  kevinjonesAug 15, 2025
  Check that the four louver positions at the air outlet are in the same position on your Hitachi Air Conditioner.
W
williamcastilloAug 20, 2025
Why is my Hitachi RAS-10HNCE making sounds from the indoor unit heat exchanger?
- D
  Dawn Trevino MDAug 21, 2025
  During cooling operation, a sound may be heard from the indoor unit heat exchanger due to water freezing or melting in your Hitachi Air Conditioner.
A
Angela MunozAug 27, 2025
Why does my Hitachi RAS-10HNCE have a hot start during heating operation?
- N
  Nathan MartinAug 27, 2025
  During heating operation, to prevent cold air discharge, the fan speed of your Hitachi Air Conditioner is automatically controlled, starting from a slow speed and adjusting to the set speed based on the discharge air temperature. During this time, the louver is fixed horizontally.
C
christysalazarSep 1, 2025
What to do if the swing louver's position is abnormal in my Hitachi Air Conditioner?
- G
  gallagherericSep 2, 2025
  Check that the four louver positions at the air outlet are in the same position on your Hitachi Air Conditioner.

Hitachi RAS-10HNCE Specifications

General

Heating Capacity	3.2 kW
Refrigerant	R410A
Power Supply	220-240V, 50Hz
Type	Split
Outdoor Unit Noise Level	48 dB(A)

Summary

General Information and Safety

Applied Safety Symbols and Warnings

Explanation of DANGER, CAUTION, and NOTE symbols for safe operation.

Important Notice and Operating Conditions

Automatic Controls and Basic Troubleshooting

Basic Troubleshooting Guide

Common issues, sounds, smells, and operational checks for diagnosing problems.

Component Identification

Refrigerant Cycle Diagrams

Units Installation Procedures

12.1 Outdoor Unit Installation Overview

Refrigerant Piping and Charging

13.1 Piping Materials and Suspension

13.3 Outdoor Unit Piping Connections

Instructions for connecting refrigerant pipes to the outdoor unit from various directions.

13.4 Refrigerant Piping Length Specifications

Specifications for maximum refrigerant piping lengths for different system configurations.

Maximum Piping Lengths: IVX Series

Piping length limits for IVX Premium and Standard series based on unit capacity.

Maximum Piping Lengths: ES Series

Piping length specifications for ES series outdoor units and system configurations.

13.4.1 Piping Size and Multikit/Distributor Selection

Line Branch System Installation Details

13.4.3 Brazing Work Procedures

13.4.4 Refrigerant Charge Procedures

Instructions for safely charging refrigerant, including quantities and leak checks.

Refrigerant Charging Quantity and Pump Down

13.6 Refrigerant Charging Quantity Details

Details pre-shipment charges and calculation methods for additional refrigerant.

13.7 Refrigerant Pump Down Procedure

Drain Piping and Electrical Wiring Basics

15.1 General Electrical Wiring Checks

15.2 Outdoor Unit Electrical Connections

Diagrams showing electrical connections between indoor and outdoor units.

15.2.1 Outdoor Unit DIP Switch Settings

Outdoor Unit DIP Switch Configurations

15.3 Common Wiring Practices

15.3.1 Indoor to Outdoor Unit Wiring

15.3.3 H-LINK II System Overview

15.3.4 System Installation DIP Switch Setting

Test Running Procedures

16.1 Test Run via Remote Control

Step-by-step guide for performing test runs using the remote control switch.

16.2 Test Run from Outdoor Unit Side

Test Run Modes and Operations

Safety Summary and Control Device Settings

Compressor Protection Mechanisms

Overview of high pressure switches and cut-out settings for compressor safety.

Fan Motor Protection Features

Troubleshooting and Alarm Codes

Remote Control Switch Alarm Code Indications

Table showing alarm codes, model codes, and their meanings for remote control switch indications.

Related product manuals

Hitachi RAS-10HNPE

Hitachi RAS-10HNBRMQ1

Hitachi RAS-10HRNM

Hitachi RAS-10HRNSE

Hitachi RAS-10MH1

Hitachi RAS-10FSG

Preview: Hitachi RAS-10XH1

Hitachi RAS-10XH1

Preview: Hitachi RAS-10KH3

Hitachi RAS-10KH3

Preview: Hitachi RAS-10JH4

Hitachi RAS-10JH4

Hitachi RAS-10CH1

Hitachi RAS-10FS3