Do you have a question about the Hitachi RAS-10KH2 and is the answer not in the manual?
Type | Split System |
---|---|
Cooling Capacity | 2.8 kW |
Power Supply | 220-240V, 50Hz |
Refrigerant | R410A |
Outdoor Unit Noise Level | 48 dB |
Air Flow (Indoor Unit) | 520 m³/h |
Safety measures and requirements for installing the unit correctly.
Safety guidelines for moving or servicing the air conditioner.
Important safety instructions for operating the air conditioner.
Identifies and explains parts of the indoor air conditioning unit.
Identifies and explains parts of the outdoor air conditioning unit.
Lists model names and their physical dimensions.
Explains the function of the filter indicator light.
Describes the operation indicator light and its blinking patterns.
Explains the function of the timer indicator light.
Details how to use the temporary switch for operation.
Function, range, handling of the remote control, and display overview.
How to select modes (HEAT, COOL, etc.) and fan speeds.
Adjusting temperature and setting timers (ON/OFF, SLEEP).
How to select and start automatic operation mode.
Details temperature settings and fan speeds for auto mode.
Steps to select and start heating operation.
Recommended temperature range and fan speed for heating.
Steps to select and start dehumidifying operation.
How dehumidifying works based on room temperature.
Steps to select and start cooling operation.
Recommended temperature range and fan speed for cooling.
How to select and start fan-only operation.
Explains fan speed changes in AUTO mode for heating/cooling.
How to set the current time and date.
Steps to set the timer to turn the unit off.
Steps to set the timer to turn the unit on.
How to set both an automatic turn-on and turn-off time.
Procedure to cancel timer reservations.
How to set the sleep timer for automatic turn-off.
Combining sleep timer with on-timer for specific operation.
How to cancel a set sleep timer.
How the fan speed and temperature are controlled with sleep timer.
Important notes and limitations regarding sleep timer usage.
How to adjust the horizontal air deflector for airflow direction.
How to adjust the vertical air deflector for airflow direction.
Step-by-step guide to replacing remote control batteries.
Safety precautions for battery usage and storage.
Advice on maintaining optimal room temperature and ventilation.
Tips for using timers to enhance comfort.
Reminders about filter maintenance and adjusting settings for vulnerable users.
How heat sources affect cooling capability and room temperature.
Instructions for when the unit is not operated for a long time.
Safety measures to take during lightning.
How to avoid interference with other electrical devices.
Step-by-step guide to attaching the air cleansing and deodorizing filters.
Information on filter performance, washing, and replacement.
Procedure for cleaning the air filter and its importance.
Notes on cleaning, washing, and replacing air cleansing filters.
How to clean the front panel of the indoor unit.
Instructions for detaching and reattaching the front panel.
Procedures for preparing the unit for extended storage.
Importance of proper earth line and circuit breaker installation.
Explanation of wire colours for mains connection.
Key points for regular inspection by qualified personnel.
Points to check when the unit does not operate or perform well.
Explains sounds or sensations that are normal during operation.
Information on when and how to contact customer support.
Information about slight brightness fluctuations on switching on.
Recommended outdoor temperature range for cooling operation.
Maximum and minimum indoor/outdoor temperatures for cooling/heating.