– 19 –
“ ”
“ ”
“ ”
“ ”
Function Operation
Heating
Cooling
and
dehumidifying
Fan
The room temperature will be
controlled 5°C below the
temperature and the FAN
SPEED will be set to LOW setting
30 minutes after the setting of
the sleep timer.
The room temperature will be
controlled 2°C above the
temperature and the FAN
SPEED will be set to LOW setting
30 minutes after the setting of
the sleep timer.
The settings of room temperature and circulation are varied.
2°C
5°C
Sleep
timer set
2 hours
later
30 minutes later
30 minutes later
3 hours later
7 hours later
3 hours later1 hour later
Sleep timer set
2 hours
later
6 hours
later
7 hours
later
Explanation of the sleep timer
The device will control the FAN SPEED and room temperature automatically so as to be quiet
and good for people’s health.
You can set the sleep timer to turn off after 1, 2, 3 or 7 hours. The FAN SPEED and room
temperature will be controlled as shown below.
Operation with the sleep timer
NOTE
●
If date or current time is not set, sleep timer can not be set.
●
If you set the sleep timer after the off-, on/off- or off/on-timer has been set, the sleep timer becomes
effective instead of the off-, on/off- or off/on-timer set earlier.
●
You can not set other timer during sleep timer operation.
●
After sleep timer time is up and when press sleep button again, the sleep timer will be set as last setting.
●
Sleep timer effective only once.
To Next Page
Loading...
