Hitachi RAS-14CH4 - Page 44

– 46 –
Wireless remote controller
A19
1) When the operation mode
is “Automatic”, the fan
speed is automatically fixed
to “Automatic”.
2) At an “Automatic”
operation, the room
temperature setting is not
displayed.
The room temperature is
automatically set as
follows.
At cooling
Set at 27°C.
At dehumidifying
Set to a temperature
slightly lower than the room
temperature.
At heating
Set at 23°C.
3) At an “Automatic”
operation, the room
temperature setting is not
displayed.
However, every pressing
“ ” or “ V ” button changes
1°C within the range of:
27±3°C when cooling
23±3°C when heating
V
The room temperature
sensing thermistor in the
indoor unit detects the room
temperature and, according
to the particular temperature,
automatically performs
“Cooling” or “Dehumidifying”
operation.
The value indicated not at an
“Automatic” but manual
operation is not the actual
room temperature but the
room temperature setting.
A20
The room temperature os
settable within the range of
16 - 32 and not beyond.
1) When the “Automatic”
operatoin mode is
selected, “Automatic” does
not change by pressing
the fan speed select
button.
2) The room temperature
setting is not displayed.
3) Pressing the room
temperature control button
develope transmit mark
“ ” and sounds a
receive sound but does
not display the room
temperature setting.
Q19
When the room temperature
setting is “16”, pressing the
room temperature control
button “ V ” causes no
transmission. At “32”,
pressing “ ” causes no
transmission either.
Q20
V
A21
Isn’t the time over the prepro-
grammed time?
As soon as the prepro-
grammed time is reached, the
time setting disappears.
In spite of timer
“Preprogram”, setting is
extinguished.
Q21
A22
At a “Dehumidifying”
operation, the “LO” fan speed
is forcibly selected.
After selecting a
“Dehumidifying” operation
mode, the fan speed mode
remains “LO” fan speed.
Q22