– 50 –
Wireless remote controller
When the room temperature setting is “16”,
pressing the room temperature control button
“ V ” causes no transmission. At “32”, pressing
“ ” causes no transmission either.
Q9
The room temperature is settable within the
range of 16 - 32 and not beyond.
A9
There is a difference between the room
temperature setting and actual room
temperature.
Q6
There may be a difference between the
room temperature setting and actual room
temperature on account of the room structure,
air fl ow, etc.
If there is a difference from the room
temperature, adjust the set temperature to
keep living space at a comfortable temperature.
A6
Common, etc.
In case of “ON” timer, the operation does
not start at a preprogrammed time but a
little earlier.
Q7
Nice temperature reservation
The “Nice temperature reservation” functions.
The operation starts earlier so the room
temperature will be as set at a programmed
time.
The operation starts at most 60 minutes before
a preprogrammed time.
A7
The time to start an operation is irregular
while preprogramming at the same time.
Q8
The “Nice temperature reservation” operates.
The starting time depends on the room load.
A8
After selecting a “Dehumidifying” operation
mode, the fan speed mode remains “LO” fan
speed”.
Q10
At a “Dehumidifying” operation, the “LO” fan
speed” is forcibly selected.
A10
To Next Page
Loading...
