To Next PageTo Next Page
Need help?Do you have a question about the Hitachi RAS-35FH6 and is the answer not in the manual?
General| Brand | Hitachi |
|---|---|
| Model | RAS-35FH6 |
| Category | Air Conditioner |
| Language | English |
Crucial safety instructions for personnel before and during repair operations.
Specific procedures and precautions for handling semiconductors.
Crucial safety warnings and prohibitions for unit operation.
Safety guidelines for installing the air conditioner unit properly.
Safety measures to follow during normal operation of the unit.
Safety advice for performing maintenance or shifting the unit.
Steps for cleaning the air filter to maintain performance.
Recommended inspection points for periodic checks.
Electrical wiring schematic for the indoor and outdoor units.
Detailed schematic of the unit's electronic circuits.
Functional overview of the unit's system architecture and component connections.
Diagram illustrating the refrigerant flow for cooling, heating, and defrosting.
Explanation of how the outdoor unit converts AC to DC power.
Steps to identify and resolve power circuit issues based on voltage checks.
How the system prevents overload by controlling compressor speed.
Safety warnings and essential checks before troubleshooting the unit.
Safe method for discharging capacitors in the power circuit before servicing.
Understanding how the timer lamp and LD301 indicate unit failures.
Mapping blinking patterns to specific failure causes and possible solutions.
Checking the compressor connector and self-diagnosis lamp status.
Diagnosing issues based on the indoor timer lamp, compressor status, and refrigeration cycle.
Verifying power supply and control voltages for the indoor unit.
Detailed checks on the control P.W.B. power circuit, including voltage and component integrity.
Verifying cable connections and voltage outputs for outdoor unit operation.
Checking power supply voltage and interpreting self-diagnosis lamp (LD301) codes.
Diagnosing and resolving communication errors between indoor and outdoor units.
Troubleshooting thermistor errors indicated by LD301 blinking codes.
Diagnosing OH thermistor issues and overload protection trips.
How to use the service switch for forced cooling mode operation.
Methods for diagnosing the Intelligent Power Module using a multimeter.
