The operation modes changed in sequence:
The fan speed is changed in sequence:
Selecting mode
FAN mode
Heating mode is NOT available for cooling only air conditioner.
At "FAN ONLY" mode, only "Auto" is not available.
A
t "DR
Y" mode, F
an speed is set at "A
UT
O” automatically
, "F
AN SPEED" button
is ineff
ectiv
e in this case.
Setting temper
atur
e
T
urning on or off
SMAR
T
, SUPER, QUIET
, TIMER, IFEEL, CL
OCK and SLEEP oper
ation modes will be specified in the f
ollowing pages.
Changing modes during operation, sometimes the unit does not response at once. Wait 3 minutes.
During heating operation, air flow is not discharged at the beginning. After 2-5 minutes, the air flow will be discharged
until temperature of indoor heat exchanger rises.
W
ait 3 minutes bef
or
e r
estarting the appliance.
16℃
~
30℃(61°F~86°F)
Range of available set temperature
*HEATING, COOLING
DRY
±7 deg C
unable to set
FAN
ONLY
Operation modes
*Note: s and hold “ ” button and “ Press and hold “ button
together will alternate the temperature display between
the ℃ and °F scale.
*Note: Heating mode is NOT available for cooling only models.
**Note
”
with
: At “Dry” mode, a decrease or rise of up to 7℃ can be set
Remote controller if you still feel uncomfortable.
button once
Press button can change the unit operating status.
Result :
Result :
Press button once by once
Press button once by once
Auto
High
Medium
HEATING
COOLING
DRY
FAN ONLY
Raise temperature setting by 1℃ or 1°F
Lower temperature setting by 1℃ or 1°F
button onc
e
Press
Result :
Press
Result :
PRESS
PRESS
Auto
Low
1. OPTION LIST
To Next Page
Loading...
