EasyManua.ls Logo

Hitachi RAS-4.0PNNBDH1 - Heating Mode Logic

Hitachi RAS-4.0PNNBDH1
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5. CONTROL LOGIC DESCRIPTION
5.3 Heating Mode
Indoor fan running rules:
In s
everal minutes
after
t
he heati
ng mo
de is
started,
th
e fa
n of
th
e indoor unit will not run until
the heat exchanger of the indoor unit reaches a high enough temperature. That is because
cold air prevention system is operating. After several minutes, the speed can be selected as
high, (medium), low and auto.
The auto fan:
T1 is indoor room temperature. Ts is setting temperature.
DC-Inverter outdoor unit
Outdoor fan running rules:
Once the outdoor fan start up, it will follow the below rules:
Single outdoor fan: First, it will run in an invariable speed f
or a short time; Then it will regulate
the speed by the indoor-c
oil temperature.
Double outdoor fan: If it has
two outdoor fans, the upper fan regulates the speed by the rul
es,
and the downer fan speed lower than the upper fan speed for 30r
pm~60rpm.
Ts-T1
0
2
4
Low
Medium
High
50

Other manuals for Hitachi RAS-4.0PNNBDH1

Related product manuals