1
1
.
.
O
O
P
P
T
T
I
I
O
O
N
N
L
L
I
I
S
S
T
T
Remote controller
POWERFUL
Used to start or stop the fast cooling/heating.
(Fast cooling operates at high fan speed with
16℃ set temp. automatically; Fast heating
operates at auto fan speed with 30℃ set
temp. automatically).
3
ON/OFF
The appliance will be started when it is
energized or will be stopped when it is
in operation, if you press this button.
4
The remote controller transmits signals to the system.
MODE
Press this button to select the operation mode.
1
AUTO
Used to enter fuzzy logic operation directly.
5
TIMER
Used to set or cancel the timer operation.
7
FAN
Used to select fan speed in sequence auto,
quiet low, low, medium and high.
6
SLEEP
Used to set or cancel Sleep Mode operation.
9
Used to stop or start vertical adjustment
louver swinging and set the desired left/right
airflow direction.
10
LEFT/RIGHT
adjustment
louver swinging and set the desired up/
down airflow direction.
Used to stop or start horizontal
8
UP/DOWN
Used to adjust the room temperature and
the timer.
2
TEMP.
1
4
2
2
3
7
6
10
8
9
Note: ①Each mode and relevant function will be further specified in following pages.
②Heating and electric heating function are not available in single cooling only models.
③Pictures in the manual are for reference only, specifications are subject to the physical product.
Indication symbols on LCD:
Cooling indicator
Dry indicator
Fan only indicator
Heating indicator
Auto indicator
High fan speed
Medium fan speed
Low fan speed
Quiet fan speed
Display set temperature
Timer ON/OFF set hour
Signal transmit
Battery indicator
Timer ON indicator
Timer OFF indicator
Button locked indicator
Auto fan speed Run indicator
Sleep indicator
Display set temp.indicator
Fan speed indicator
OFF indicator
5
11
RESET
Back to the factory defaults.
11
2. Wireless Rmote Controller (Model：HCRA31NEWH)
To Next Page
Loading...
