– 10 –
CIRCULATION OPERATION
Press the button so that the display indicates
(CIRCULATE).
Circulating operation starts with a beep.
Press the FAN SPEED button and select the desired FAN
SPEED (the display indicates your choice).
Press the temperature control button to set to the desired
temperature.
■ As the settings are stored in memory in the remote controller,
you only have to press the
(CIRCULATION) button next time.
Press the (STOP) button to stop operation.
STOP
■ Circulation Function
● During circulation operation, compressor will not be running and there is no cooling operation with only
indoor fan running.
● When the setting temperature is higher than room temperature, indoor fan will stop running.
1
2
3
EN2 RAS-RAC-S18CDT 10EN2 RAS-RAC-S18CDT 10 1/6/14 4:54 PM1/6/14 4:54 PM
To Next Page
Loading...
Need help?
General
