To Next PageTo Next Page
Need help?Do you have a question about the Hitachi RCI-3.0FSN1E and is the answer not in the manual?
General| Cooling Capacity | 3.0 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Refrigerant | R410A |
| Indoor Unit Weight | 9 kg |
| Type | Split |
| Power Supply | 220-240V, 50Hz, 1 Phase |
| Outdoor Unit Noise Level | 50 dB |
| Outdoor Unit Dimensions (WxHxD) | 780 x 540 x 285 mm |
Provides essential information and warnings before operating the air conditioner.
Details the functions and operation of the specific remote control model.
Lists sounds and smells that are not indicative of a fault.
Provides instructions for contacting service if issues persist after checks.
Provides guidelines and precautions for installing outdoor units.
Specifies required clearances for outdoor unit installation.
Details the types of copper pipes and materials required for refrigerant piping.
Guides the connection of refrigerant piping to the outdoor unit's stop valves.
Covers design charts for refrigerant piping length and system examples.
Provides guidelines for selecting correct pipe sizes for various connections.
Details installation requirements for multi-unit systems, including height differences.
Details precautions for charging refrigerant and avoiding hazards.
Explains how to calculate and add refrigerant based on piping length.
Lists checks to ensure electrical components are correctly selected and installed.
Outlines the steps for performing a test run using the remote control.
Details the test run procedure from the outdoor unit's perspective using DIP switches.
Lists alarm codes, their categories, and potential causes.
Provides a table of common problems, their causes, and solutions.
