Need help?Do you have a question about the Hitachi RCI-3.0UNE1NH and is the answer not in the manual?
General| Cooling Capacity | 3.0 kW |
|---|---|
| Heating Capacity | 3.6 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Power Supply | 220-240V/50Hz/1Ph |
| Outdoor Unit Noise Level | 50 dB(A) |
| Cooling Capacity (kW) | 3.0 kW |
| Indoor Unit Weight | 9 kg |
| Type | Split System |
| Cooling Capacity (BTU) | 10, 200 BTU |
| Power Supply (V/Hz/Ph) | 220-240V/50Hz/1Ph |
Details the installation process for the wired remote controller.
General guide to identifying and resolving air conditioner faults.
Methods for checking fault codes displayed on the remote or unit.
Details fault codes indicated by LEDs on the outdoor unit's control board.
Lists fault codes related to the drive system of the air conditioner.
Table detailing outdoor unit fault codes, descriptions, and solutions.
Table detailing indoor unit fault codes, descriptions, and solutions.
Details causes and corrective measures for overload in cooling mode.
Details causes and corrective measures for overload in heating mode.
Table of drive fault codes for 1.0/1.5/2.0/3.0HP models.
Table of drive fault codes for 4.0/5.0/6.0/6.5HP models.
Details remaining drive fault codes and their solutions.
Steps to check the refrigerant system of the air conditioner.
Flowchart for testing the refrigerant system in cooling and heating modes.
Information on compressor examination and repair.
How to test compressor winding resistance and familiar errors.
Steps for disassembling the outdoor unit for 1.0-3.0HP models.
Steps for disassembling the 4.0HP outdoor unit.
Steps for disassembling the 6.0/6.5HP outdoor unit.
Protection logic for low evaporator temperatures in cooling mode.
Protection logic for high condenser temperatures.
To Next Page
