Need help?Do you have a question about the Hitachi RPIM-3.0UNE1NH and is the answer not in the manual?
Covers installation, custom parameters, temperature settings, and basic operations for the wired remote controller.
Details wireless remote controller models, operation modes, timers, and special functions like Auto and Powerful.
Explains the parts, proper installation location, and connection of the IR receiver unit.
Describes how to send commands from the controller and the receiver's operational feedback.
Provides a guide to checking fault codes displayed on control boards, remote controllers, and LEDs.
Lists various outdoor and drive fault codes, their possible reasons, and troubleshooting steps.
Details specific overload issues in cooling and heating modes, including causes and corrective measures.
Outlines the procedure for checking the refrigerant system, including pressure testing and system flow.
Describes methods for testing fan motors, compressor, fuse, capacitor, and other internal components.
Step-by-step instructions for safely disassembling and reassembling outdoor unit components like casing, motor, and compressor.
Provides instructions for disassembling ducted, cassette, and floor ceiling indoor units' fan motors and casings.
Explains indoor fan running rules and compressor/outdoor fan control logic for fan-only and cooling modes.
Details the control logic for indoor fan and compressor operation during heating and auto modes.
Describes the logic for evaporator low-temperature and condenser high-temperature protection mechanisms.
General| Cooling Capacity (kW) | 3.0 |
|---|---|
| Heating Capacity (kW) | 3.2 |
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Refrigerant | R32 |
| Indoor Unit Weight | 9 kg |
| Type | Split System |
| Power Source | 220-240V, 50Hz |
| Outdoor Unit Noise Level | 50 dB(A) |
To Next Page
