EasyManua.ls Logo

Hitachi RPK-1.0FSNQS User Manual

Hitachi RPK-1.0FSNQS
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
RPK-0.8FSNQS
P00611Q
ORIGINAL INSTRUCTIONS
Wall-
Mounted
RPK-1.0FSNQS
RPK-1.3FSNQS
RPK-1.5FSNQS
Type
RPK-1.8FSNQS
RPK-2.0FSNQS
RPK-2.3FSNQS
Question and Answer IconNeed help?

Do you have a question about the Hitachi RPK-1.0FSNQS and is the answer not in the manual?

Hitachi RPK-1.0FSNQS Specifications

General IconGeneral
BrandHitachi
ModelRPK-1.0FSNQS
CategoryAir Conditioner
LanguageEnglish

Summary

Section1 Operation Manual

Safety Summary

Key safety precautions and warnings for operating the unit, including danger and caution notices.

System Description

Overview of the heat pump air conditioner's capabilities, capacity combinations, and control modes.

Remote Control Switch

Instructions on using the remote control, including temperature setting, touch switches, and multi-unit control.

Before Operation

Essential pre-operation checks and procedures, including power supply, compressor heating, and outdoor unit condition.

Operation Method

Guidance on operating the unit via wired or wireless remote controls, referring to attached manuals.

Setting of Automatic Swing Louver

How to control the automatic swing louver function for air distribution, including stopping and starting.

Automatic Control

Details on various automatic control functions like compressor protection, oil return, frost prevention, and defrosting.

Filter Cleaning

Instructions on how to clean the air filter, including taking out, cleaning, and resetting the indicator.

Troubleshooting

Common issues, their causes, and recommended solutions, including no operation and performance problems.

Section2 Installation & Maintenance Manual

Safety Summary

Crucial safety guidelines for installation and maintenance personnel, emphasizing professional work.

Necessary Tools and Instrument List for Installation

A comprehensive list of tools and instruments required for proper unit installation.

Transportation and Handling

Procedures for safely transporting and handling the indoor unit before installation.

Indoor Unit Installation

Detailed instructions for installing the indoor unit, including clearances, mounting, and panel removal/installation.

Refrigerant Piping Work

Procedures and precautions for connecting refrigerant piping, including materials, sizes, and tightening.

Drain Piping

Instructions for connecting the drain piping, including different directions, configurations, and connections.

Electrical Wiring

Essential steps and warnings for electrical wiring connections, checks, and component tightening.

Test Run

Procedures for performing a test run after installation to ensure proper operation and check points.

Safety and Control Device Setting

Settings for safety and control devices like fuse capacity and thermostats for indoor units.

Field Minimum Wire Sizes for Power Source

Specifies minimum wire sizes for power supply based on current and standards (EN60335-1).

Setting of Dip Switches

Detailed instructions for setting various dip switches for unit configuration, including control model and refrigerant cycle.

Setting the Filter Indication Interval

How to adjust the filter cleaning reminder interval on the remote control display.

Related product manuals