To Next PageTo Next Page
Need help?Do you have a question about the Hitachi RPK-1.0FSN1M and is the answer not in the manual?
General| Brand | Hitachi |
|---|---|
| Model | RPK-1.0FSN1M |
| Category | Air Conditioner |
| Language | English |
Immediate hazards resulting in severe injury or death.
Hazards or unsafe practices that could result in severe personal injury or death.
Hazards or unsafe practices that could result in minor personal injury or property damage.
Identification of individual parts of the RPK unit.
General procedures and considerations for installing the indoor unit.
List and purpose of accessories included with the indoor unit for installation.
Pre-installation checks and required clearances for operation and maintenance.
Step-by-step instructions for mounting the indoor unit bracket and unit.
Technical drawings and dimensions for the indoor unit mounting bracket.
Positions and methods for connecting refrigerant piping to the unit.
Available directions for refrigerant piping connection (top, left, right).
Specifications for gas and liquid piping connection sizes for different refrigerants.
General guidelines and precautions for drain piping installation.
Steps for connecting the drain pipe, including right, left, and rear side options.
Instructions for connecting power supply and wires between indoor and outdoor units.
Diagram showing dip switch configurations for unit settings.
Procedure for setting the unit number for multi-unit installations.
Setting for unit capacity code, pre-set from factory.
Information on fuse recovery in case of high voltage application.
Setting for refrigerant cycle number, usually set before shipment.
How to operate the unit using the emergency operation switch.
Interpreting alarm codes based on blinking patterns of indicator lamps.
Step-by-step guide on how to remove and clean the air filter.
Feature for identifying specific indoor units when installed adjacently.
