Hitachi VT-FX6500A - Page 37

37
5 Set the start hour
Press the PLAY/ or STOP/ button until the desired hour appears. (Example: 07)
Then, press the F.FWD/
button.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 05/04 THUR
START TIME 07: -- --
END TIME -- : -- --
CHANNEL --
REC SPEED --
6 Set the start minute
Press the PLAY/ or STOP/ button until the desired minute appears. (Example: 30)
Then, press the F.FWD/
button.
Next, press the PLAY/
or STOP/ button to point to "AM" or "PM". (Example: PM) Then, press the
F.FWD/
button.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 05/04 THU
START TIME 07:30 PM
END TIME -- : -- --
CHANNEL --
REC SPEED --
AM
→ PM
7 Set the end hour
Press the PLAY/ or STOP/ button until the desired hour appears. (Example: 08)
Then, press the F.FWD/
button.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 05/04 THU
START TIME 07: 30 PM
END TIME 08: -- --
CHANNEL --
REC SPEED --
8 Set the end minute
Press the PLAY/ or STOP/ button until the desired minute appears. (Example: 30) Then, press the
F.FWD/
button.
Next, press the PLAY/
or STOP/ button to point to "AM" or "PM". (Example: PM) Then, press the
F.FWD/
button.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 05/04 THU
START TIME 07: 30 PM
END TIME 08: 30 PM
CHANNEL --
REC SPEED --
AM
→ PM
9 Set the channel number
Press the PLAY/ or STOP/ button until the desired channel number appears. (Example: 16) Then,
press the F.FWD/
button.
• Remember refer to "ANTENNA/CABLE CONNECTIONS" on pages 11 and 12 if you have a cable
box or satellite box before setting the channel number.