How to fix Hitachi Air Conditioner transmission alarm?
If your Hitachi Air Conditioner displays a 'Transmission Alarm (Not outdoor unit detected)', it typically indicates a connection issue. Check the connectors for any looseness or breakage, as the cause may be a loose, disconnected, broken, or short-circuited connector.
What causes Hitachi YUTAKI S COMBI RWD-2.5NWE-260S Air Conditioner hydraulic alarm pressure?
If your Hitachi Air Conditioner displays 'Hydraulic alarm pressure', check the system for any leaks or blockages affecting water pressure. This alarm indicates that water pressure is not detected in the hydraulic cycle.
How to troubleshoot Hitachi YUTAKI S COMBI RWD-2.5NWE-260S LCD H-link RCS transmission error?
If your Hitachi Air Conditioner shows 'LCD H-link RCS transmission error', inspect and repair the H-link communication wiring. The cause is no H-link communication for a continuous period of 1 minute between Indoor and LCD User control by connection wiring (breaking, wiring error, etc.)
How to reconfigure LCD settings on Hitachi Air Conditioner?
If your Hitachi Air Conditioner displays 'Incorrect LCD setting', reconfigure the LCD settings. This indicates that the current LCD configuration does not allow proper operation.
What causes Transmission error between Central and indoor communication in Hitachi YUTAKI S COMBI RWD-2.5NWE-260S Air Conditioner?
If your Hitachi Air Conditioner displays a 'Transmission error between Central and indoor communication', inspect and repair the indoor fuse and wiring. The issue is often caused by an indoor fuse meltdown or problems with the indoor/central connection wiring (breaking, wiring error, etc.).
What does Abnormality of Power Supply Phase mean on Hitachi YUTAKI S COMBI RWD-2.5NWE-260S Air Conditioner?
If your Hitachi Air Conditioner displays 'Abnormality of Power Supply Phase', check the power supply phase connections, as the cause is a reverse or open phase.
What causes excessively high discharge gas temperature at the top of compressor in Hitachi YUTAKI S COMBI RWD-2.5NWE-260S Air Conditioner?
If your Hitachi Air Conditioner shows 'Excessively high discharge gas temperature at the top of compressor', inspect refrigerant levels and expansion valves. This can be caused by insufficient refrigerant charge, refrigerant leakage, or an expansion valve that is closed or clogged.
What does Decrease in discharge gas superheat mean for Hitachi YUTAKI S COMBI RWD-2.5NWE-260S Air Conditioner?
If your Hitachi Air Conditioner displays 'Decrease in discharge gas superheat', check refrigerant charge and inspect related components. Possible causes are excessive refrigerant charge, failure of thermistor, incorrect wiring, incorrect piping connection, or expansion valve locking at opened position (disconnected connector).
How to solve RF Communication failure on Hitachi YUTAKI S COMBI RWD-2.5NWE-260S?
If your Hitachi Air Conditioner shows 'RF Communication failure', check the RF communication setup. This issue occurs when there is no communication for 1 hour with one or two RF receivers which are bound to the RF-Bridge.
General| Model | YUTAKI S COMBI RWD-2.5NWE-260S |
|---|---|
| Heating Capacity | 2.5 kW |
| Cooling Capacity | 2.5 kW |
| Energy Efficiency Class (Heating) | A++ |
| Energy Efficiency Class (Cooling) | A+ |
| Refrigerant | R32 |
| Type | Air to Water Heat Pump |
| Noise Level (Outdoor Unit) | 45 dB(A) |
Contains crucial safety information, including DANGER and CAUTION warnings for operation and installation.
Provides essential reading instructions and notices regarding installation, use, and product specifications.
Details Energy-related Product (ERP) performance data for YUTAKI S, S COMBI, S80, and M models.
Details the location and function of DIP switches and rotary switches for outdoor unit configuration.
Guides users through the initial setup and configuration of the controller using a wizard.
Lists alarm codes displayed on the remote control switch and their corresponding details.
Details alarm codes, origins, and main factors for abnormal conditions in indoor units.
Lists alarm codes, categories, abnormality types, and main causes for outdoor unit issues.
Outlines general maintenance procedures for both outdoor and indoor units, including checks and precautions.
To Next Page