EasyManua.ls Logo

Hitachi ZX210-6N User Manual

Hitachi ZX210-6N
497 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ENMDC1-NA3-4
ZX130
-6N
•160LC
-6N
•180LC
-6N
•210
-6N
•210LC
-6N
•250LC
-6N
•300LC
-6N
•350LC
-6N
•380LC
-6N
HYDRAULIC EXCAVATOR OPERATOR'S MANUAL
URL:http://www.hitachi-c-m.com
PRINTED IN JAPAN (K) 2020, 11
Serial No.
ZX130
-6N
140001 and up
ZX160LC
-6N
240001 and up
ZX180LC
-6N
540001 and up
ZX210
-6N,
210LC
-6N
340001 and up
ZX250LC
-6N
440001 and up
ZX300LC
-6N
840001 and up
ZX350LC
-6N
940001 and up
ZX380LC
-6N
640001 and up
ENMDC1-NA3-4
PART NO.
Operator's Manual
130
-6N
160LC
-6N
·180LC
-6N
210
-6N
·210LC
-6N
250LC
-6N
300LC
-6N
350LC
-6N
·380LC
-6N
Hydraulic Excavator
This book is printed on recycled paper.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Hitachi ZX210-6N and is the answer not in the manual?

Hitachi ZX210-6N Specifications

General IconGeneral
BrandHitachi
ModelZX210-6N
CategoryExcavators
LanguageEnglish

Summary

SAFETY

Fasten Your Seat Belt

Always fasten the seat belt securely when the machine is in operation.

Drive Machine Safely

Confirm travel direction, detour obstructions, and drive cautiously on slopes.

Avoid Tipping

Fasten seat belt, be careful on gradients, reduce speed, and avoid sharp turns.

Prevent Fires

Check for oil leaks and short circuits to prevent fires.

SAFETY SIGNS

All safety signs and their locations are illustrated; keep them clean and replace if lost.

GETTING ON AND OFF THE MACHINE

OPERATOR'S STATION

Multi Function Monitor

Describes the features and screen configuration of the multi-function monitor.

DEF/AdBlue® Level Alarm

Alerts the operator about low DEF/AdBlue® levels or system issues.

Remedy

Provides solutions for various alarms and system warnings.

Manual Regeneration Procedure

Step-by-step guide for performing manual regeneration.

MAINTENANCE

Details on maintenance schedules and procedures.

TROUBLESHOOTING

Lists problems, causes, and solutions for machine issues.

Impossible to Start the Engine

Lists causes and solutions for engine starting problems.

Hydraulic System

Troubleshooting for hydraulic system problems.

SPECIFICATIONS

Technical specifications for various machine models.

Specifications

Overall specifications for the ZX130-6N model.

OPERATING THE ENGINE

Inspect Machine Daily Before Starting

Perform required daily checks before starting the engine.

Starting the Engine

Procedure for starting the engine in ordinary temperature.

Stopping the Engine

Procedure for stopping the engine, including cool-down for turbochargers.

DRIVING THE MACHINE

OPERATING THE MACHINE

Pilot Control Shut-Off Lever

Prevents accidental machine movement when operator is not in seat.

Auto Shut-Down

Configuration for automatic engine shutdown.

Aftertreatment Device Manual Regeneration

Step-by-step guide for performing manual regeneration.

How to Lower Boom in Case of Emergency and When Engine Stops

Procedure to lower boom if engine stops unexpectedly.

TRANSPORTING

Related product manuals