EasyManua.ls Logo

Hitachi ZX130-6N User Manual

Hitachi ZX130-6N
497 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ENMDC1-NA3-4
ZX130
-6N
•160LC
-6N
•180LC
-6N
•210
-6N
•210LC
-6N
•250LC
-6N
•300LC
-6N
•350LC
-6N
•380LC
-6N
HYDRAULIC EXCAVATOR OPERATOR'S MANUAL
URL:http://www.hitachi-c-m.com
PRINTED IN JAPAN (K) 2020, 11
Serial No.
ZX130
-6N
140001 and up
ZX160LC
-6N
240001 and up
ZX180LC
-6N
540001 and up
ZX210
-6N,
210LC
-6N
340001 and up
ZX250LC
-6N
440001 and up
ZX300LC
-6N
840001 and up
ZX350LC
-6N
940001 and up
ZX380LC
-6N
640001 and up
ENMDC1-NA3-4
PART NO.
Operator's Manual
130
-6N
160LC
-6N
·180LC
-6N
210
-6N
·210LC
-6N
250LC
-6N
300LC
-6N
350LC
-6N
·380LC
-6N
Hydraulic Excavator
This book is printed on recycled paper.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Hitachi ZX130-6N and is the answer not in the manual?

Hitachi ZX130-6N Specifications

General IconGeneral
BrandHitachi
ModelZX130-6N
CategoryExcavators
LanguageEnglish

Summary

SAFETY

Safety Alert Symbols and Signal Words

Understand hazard symbols and signal words for personal safety.

Follow Safety Instructions

Read and follow all safety signs and manual messages for safe operation.

Stability and Tipping Precautions

Guidance on avoiding machine tipping, especially on slopes and frozen ground.

Fire Prevention

Procedures for preventing fires related to oil leaks, short circuits, and flammable materials.

BREAK-IN Procedures

Observe Engine Operation Closely

Guidance on initial operation and service for new machines to ensure longevity.

OPERATING THE ENGINE

Inspect Machine Daily Before Starting

Daily checks required before engine startup to ensure safe and proper operation.

Starting the Engine

Step-by-step procedure for starting the engine under normal and cold weather conditions.

Stopping the Engine

Proper procedure for shutting down the engine, including turbocharger cool-down.

DRIVING THE MACHINE

OPERATING THE MACHINE

Control Lever and Pilot Control Operations

Explains the function and operation of control levers and the pilot control shut-off lever.

MAINTENANCE

Correct Maintenance and Inspection Procedures

General guidelines and daily inspection checklist for machine upkeep.

Engine Oil and Filter Maintenance

Steps for checking, changing engine oil, and replacing the oil filter.

Hydraulic System Maintenance

Procedures for inspecting and maintaining hydraulic equipment, including oil and filter replacement.

TROUBLESHOOTING

Related product manuals