OPERATOR'S STATION
1-107
Cigar Lighter
Using Cigar Lighter
IMPORTANT: In case the cigar lighter does not pop out
automatically 30 seconds after pushing the cigar
lighter in, pull out the cigar lighter manually. Consult
your authorized dealer.
1. Insert key switch (1). Turn it to "ACC" or "ON" position.
2. Push and release the cigar lighter knob.
3. The cigar lighter knob will return to the original position
when the lighter becomes usable. Pull the cigar lighter
out to use.
4. After use, reinsert the cigar lighter to its original position
in the panel.
d
CAUTION: Do not power anything other than a
genuine Hitachi Construction Machinery electrical
device from the cigar lighter port.
Cigar Lighter
1
MDAA-01-297
MDC1-01-502
To Next Page
Loading...
Need help?
General
