HitachiSoft StarBoard FX-77

Need help?

Do you have a question about the HitachiSoft StarBoard FX-77 and is the answer not in the manual?

Summary

Notices and Disclaimers

Notices

General policy statements regarding reproduction, changes, and vendor information.

Disclaimers

Legal statements about liability, warranties, and rights to revise the guide.

Product Assurance Provisions

Details product limitations for EU markets, warranty references, and supported products.

Safe Handling and Markings

Markings and Symbols

Explains safety symbols used in the manual and on the product for correct use.

Safety Precautions (Part 1)

General Warnings

Lists critical safety warnings for operation, including plug insertion and handling wet conditions.

Safety Precautions (Part 2)

Specific Warnings

Details safety warnings related to product use, environment, and disposal.

Safety Precautions (Part 3)

Chemical Warnings and Wireless Usage

Covers chemical content warnings and safety guidelines for wireless device usage.

Specific Cautions

Lists specific cautions with page references for actions like fastening screws and wall strength.

1. Introduction

1.1 Parts Check

Lists all included parts in the package, including the board, pen, and accessories.

Component Identification

1.1.2 Stand Parts and Accessories

Details parts for the stand assembly, including vertical supports, crossbars, and accessories.

Part Roles and Functions

1.2.1 StarBoard Components

Describes functions of StarBoard main parts like the digitiser, function area, and pen input area.

Key Interface Elements

1.2.2 Function Area Buttons

Explains shortcut buttons on the StarBoard and their default functions.

1.2.3 Electronic Pen

Describes the electronic pen, including its battery cover and side buttons.

1.3 Assembly and Setup

1.3.1 Stand Setup Method

Instructions for assembling the stand, including fastening screws tightly.

Stand Assembly Procedures

1.3.2 Board Installation on Stand

Steps to attach the board to the stand, requiring at least two people.

Stand Height Adjustments

1.3.3 Height Adjustment

How to adjust the board's height on the stand, requiring at least two people.

1.3.2 Wall-Mounting Setup Method

Wall Mounting Bracket Installation

Instructions for installing wall mounting brackets, considering wall material and strength.

Wall Mount Board Attachment

Connecting Mounting Brackets

Steps to attach the board to wall mounting brackets, requiring at least two people.

1.3.3 Connecting for Projection Mode

Wired Connection Setup

How to connect the PC, projector, and StarBoard using a USB cable for projection.

Projection Mode Wireless Connection

Wireless Connection Steps

How to connect the PC, projector, and StarBoard using a wireless receiver.

2. Usage

2.1 Basic Usage

Overview of fundamental StarBoard operations and functions.

2.1.1 Preparation - Battery Insertion

How to insert the battery into the electronic pen correctly.

Electronic Pen Operations

2.1.2 Using the Electronic Pen

Guidance on using the electronic pen correctly, including force and grip.

Pen Functionality

2.1.3 Basic Pen Operations

Describes click, double-click, and drag actions with the pen tip.

2.1.4 Electronic Pen Setting

Explains button assignments for the pen tip and side buttons.

2.2 Projection Mode Usage

2.2.1 Wired Connection Steps

Steps for wired connection in projection mode, including device connection and software launch.

Projection Mode Wireless Connection

Wireless Connection Steps

Steps for wireless connection in projection mode, including device connection and driver installation.

3. Appendix

A. System Specifications

Technical details and specifications of the product, including dimensions and compatibility.

Product Warranty Information

B. Provisions of Product Warranty

Details about the product warranty coverage, terms, and conditions for repairs.