What to do if HitachiSoft Whiteboard StarBoard is not recognized?
If your HitachiSoft Whiteboard StarBoard is not recognized, first connect the USB cable to the PC and check the USB cable. If the issue persists, the StarBoard Software file may be corrupt, or the software installation may not have been completed correctly. In this case, uninstall and then reinstall the StarBoard Software.
What to do if HitachiSoft Whiteboard StarBoard is not recognized when connected wirelessly?
If your HitachiSoft Whiteboard StarBoard is not recognized when connected wirelessly: * Connect the USB cable to the AC adapter. * Connect the Bluetooth receiver (Bluetooth adapter etc) to the PC. * Check the USB cable and AC adapter. * Ensure you are within 10 meters of the digitizer with the Bluetooth adaptor at the front of the StarBoard. * If there is a different wireless LAN or Bluetooth device that uses the same frequency, turn off the power to any unused devices. * Install further away from the wireless device. * Change the installation location.
General| Brand | HitachiSoft |
|---|---|
| Model | StarBoard FX-77G |
| Category | Whiteboard |
| Language | English |
To Next Page