10
Features
Twin-channel Charger
X2 AC Plus Black Edition allows you to plug 2
batteries into one charger simultaneously, and
it will intelligently and automatically charge 2
batteries at once to their maximum capacity. To top
of it, the batteries being charged do not even need
to have the same conguration. You can connect
dierent chemistry (LiPo/LiFe/Lilon/LiHV/NiMH/
NiCd/Pb) batteries into any of the charging ports.
Dual Input and Power Distribution:
The X2 AC Plus Black Edition has a dual AC/DC input comprised of AC 100-240V
and DC 11-18V. In DC mode, the power of each channel is 100W with an overall
power of 200W. Power distribution is supported in AC mode. For example, if
Channel A is 70W and Channel B is 30W, total power is 100W.
Optimized Operating Software:
The X2 AC Plus Black Edition features an AUTO function that sets the feeding
current during charging or discharging. For lithium batteries especially,
this function helps prevent overcharging and its consequences. It can also
disconnect the circuit automatically and sound an alarm if an abnormal
reaction has been detected. Each programming feature of your X2 AC Plus Black
Edition is controlled by two way linkage and communication and is completely
customizable to the user’s preferences.
Battery Memory (Data Store/Load):
The charger can store up to 10 unique charge/discharge proles for each
channel and lets you recall the data from each program setting at any time.
PC Control Software “Charge Master”:
Equipped with free “Charge Master” software, the X2 AC Plus Black Edition gives
you unparalleled ability to operate the charger via your personal computer. You
can monitor pack voltage, cell voltage, and other data during battery charging
or view the charge data in real-time graphs. The “Charge Master” gives you the
option to initiate and update rmware as well.
With the “Charger Master” software and a single computer connection, you are
able to operate and update two channels at the same time.
LiPo
NiMH
To Next Page
Loading...
Need help?
General