HITWAY BK5 - Rear Fender Support Rod Fixing Method; Fender Support Rod Securing

-12-
REAR FENDER SUPPORT ROD FIXING METHOD
1. Use the No. 5
Allen key in the
16-in-1 tool to
remove the
fixing screws
and washers of
the fender
support rods
pre-installed on
the left and right
sides of the
frame, as shown
in the picture.
2. Pass the
support rod
through the
fender support
rod fixing screw
and use a No. 5
Allen key to
tighten it into the
corresponding
screw holes on
both sides of the
frame, as shown
in the picture.