Need help?Do you have a question about the HITWAY BK7 and is the answer not in the manual?
Identifies and lists the main components of the BK7 electric bike.
Align handlebar, adjust fork, and tighten stem screws and top cap.
Secure screw plug, remove/install front cover, and place handlebar.
Pre-install headlight and fender to the front fork.
Secure fender with nuts/screws and attach support rods.
Mount wheel to fork, assemble quick release rod, spring, and lever.
Screw quick release nut and adjust handle for proper fit.
Attach rear fender support rods to the frame and tighten.
Identify right pedal and screw it into the crank clockwise.
Identify left pedal and screw it into the crank counter-clockwise.
Adjust seatpost height and ensure the clamping mechanism is secure.
Attach the front reflector bracket to the handlebar and tighten.
Snap wheel reflectors onto spokes and secure them.
Long press the "i" button to turn the electric bike on or off.
General| Type | Electric Bicycle |
|---|---|
| Max Speed | 25 km/h |
| Charging Time | 4-6 hours |
| Frame Material | Aluminum Alloy |
| Max Load | 120 kg |
| Motor | 250W |
| Battery | 36V 10Ah |
| Tires | 26-inch |
| Brakes | Disc Brakes |
| Gears | Shimano |
| Wheel Size | 26 inches |
| Gears_number | 7 |
| Suspension | Front Suspension |
To Next Page
