HITWAY BK7 - Install the Front Reflector; Mounting the Front Reflector Bracket; Install the Wheel Reflectors; Attaching Wheel Reflectors to Spokes

7. Install the Front Reflector
8. Install the Wheel Reflectors
Snap the wheel
reflector into the
spoke .
(Note: the spoke
should be inserted
into the slot in the
middle of the wheel
reflector)
Turn in the reflector buckle, and screw it about 90
degrees with the flat-blade screwdriver in the
16-in-1 tool to fix the tightening wheel reflector.
Using the Phillips
screwdriver in the 16-in-1
tool, loosen the screws
on the front reflector
bracket.
Put the front
reflector bracket into
the corresponding
position of the
handlebar, and
tighten the screw
with the Phillips
screwdriver in the
16-in-1 tool.
-11-