HITWAY BK8 - Handlebar Tube Initial Assembly

109 pages

To Next Page

To Previous Page

-2-

1. Install the Handlebar Tube

1 2 3

Note: The inserted

part should exceed

the safety mark.

1. Put the headset dust cap on the frame

head tube.

2. Insert the handlebar

tube into the frame head

tube.

NOTE: Do not twist the

wire harness.

3. Pre-tighten the screws

with the No. 6 Allen key

from the 16-in-1 tool.

(don't lock too tight)

Other manuals for HITWAY BK8