Hive Bridge User Manual

4
5
Power up the inverter.
Power up the Hive Bridge. The LED should show green for 3
seconds and then start double flashing green (flashing
red/amber indicates that the Bridge is not connected to the
inverter). The double flashing indicates that the Bridge is trying
to connect to the Hive Hub.
Gettin Started
Tip! If you are installing a Hive Hub at the same time, installation
instructions for the Hive Hub can be found at
hivehome.com/guides

Hive Bridge Specifications

General

Brand	Hive
Model	Bridge
Category	Switch
Language	English