Danfoss valves require the RA adaptor.
Valves with two wings sticking out the sides require the Giacomini adaptor.
Valves with a hexagonal top and no screw thread require the Caleffi adaptor.
Hive does not provide adaptors for other valve types. In order to install Hive Radiator Valves
you will need to replace your current valve bodies with one of the standard types supported
by Hive. A plumber can help with this.
Fitting the adaptors: M30
Slip the M30 adapter over the radiator valve and screw clockwise until securely fastened.
Fitting the adaptors: RA
The RA adaptor is the only adaptor that has a screw. Slip the adaptor over the radiator valve
and use the hex key provided to securely fasten it.
To Next Page