Hiwin LA Series - 7. LAC3 Positioning Feedback (Hall Sensor) and Potentiometer; 7.1 Bare Wire for Positioning Feedback (Hall Sensor); 7.2 Specification of Positioning Feedback (Hall sensor)

A99UE13-1304
52
7. LAC3 Positioning Feedback(Hall Sensor) and Potentiometer
7.1 Bare Wire for Positioning Feedback(Hall Sensor)
7.2 Specication of Positioning Feedback (Hall sensor)
7.3 4-pin Connector for Positioning Feedback (Hall sensor)
Supply voltage 24VDC 12DC 5VDC
Output
Hight level 24VDC
Low level 0.2V/10mA Sink
(NPN)
Hight level 12VDC
Low level 0.2V/10mA Sink
(NPN)
TTL
WIRING COLOR REMARK
1 WHITE (AWG18) MOTOR(-)
2 YELLOW (AWG24) OUTPUT
3 GREEN (AWG24) GND
4 RED (AWG24) 24VDC
5 BLACK (AWG18) MOTOR(+)
4
3
1
2
SHELL
36¢X
0.7mm
36¢X
72¢X
72¢X
GREEN RED
YELLOW