Hiwin LA Series User Manual

1
A99UE13-1304
*The contents of this user`s manual are subject to change without notice. If you are
experiencing any technical difculties or do not understand the contents of this manual,
please contact our technical representative or local distributors for assistance.
CONTENTS
Chapter 1
Linear Actuator LA Series User's Guide
1. Product Specication and Operation Environment
.............................................. 5
2. Installation Guide
......................................................................................... 7
3. Caution Notice
............................................................................................ 9
4. Linear Actuator with Quick-Release User's Guide
............................................... 10
Chapter 2
LAK Series Controller User's Guide
1. Product Specication and Operation Environment
.............................................. 12
2. System Overview
......................................................................................... 18
3. Installation Guide
......................................................................................... 23
4. Basic Operation Guide
.................................................................................. 29
5. Caution Notice
............................................................................................ 31
6. LAKC-1 Over Current Protection Box
............................................................... 32
Chapter 3
Sealed Lead Acid Batteries User's Guide
1. Battery Specication
..................................................................................... 35
2. Battery Power Depletion Chart
........................................................................ 35
3. Battery Charging Guide
................................................................................. 36
4. Installation of Battery on Controller
.................................................................. 36
5. Battery Notice
............................................................................................. 38
Chapter 4
LA Series Products Wiring & Installation
1. Linear Actuator Motor Wiring
.......................................................................... 39
2. Reed Switch Specication & Application Circuitry
............................................... 41
3. PLC Examples
............................................................................................ 42
4. Positioning Feedback Device Wiring
................................................................ 43
Chapter 5
LAK\LAP Wiring & Installation
1. LAP1/LAP2 Wiring
....................................................................................... 54
2. LAP3 Wiring
............................................................................................... 56
3. LAP3N Wiring
............................................................................................. 58
4. LAP4/LAP4M/LAP4R Wiring
.......................................................................... 59
5. LAP4G Wiring
............................................................................................. 60
6. LAP4N/LAP4M/LAP4R Wiring
........................................................................ 61
7. LAP5 Wiring
............................................................................................... 62
8. Connector Drawings
..................................................................................... 64
Chapter 6
Appendix
1. Label Description
........................................................................................ 66
2. IP rank Description
...................................................................................... 67
Chapter 7
Product use in Medical Bed
.............................................................................. 68
Important Notes and Operating Safety Regulation:

Hiwin LA Series Specifications

General

Series	LA Series
Type	Linear Actuator Controller
Input Voltage	24 VDC
Compatibility	Hiwin Linear Actuators
Control Interface	RS-485
Protection	Over Current Protection, Over Voltage Protection, Short Circuit Protection

Summary

Important Notes

Operating Safety Regulation

Chapter 1 Linear Actuator LA Series User's Guide

1. Product Specification

Details standard performance specifications for Linear Actuators.

2. Installation Guide

Step-by-step instructions for installing linear actuators.

3. Note

Important notes on product usage and load considerations.

4. Quick-Release User's Guide

Guide for using the quick-release function on linear actuators.

5. LAN3 Series Operations

Operation and features specific to the LAN3 series.

6. LAN5 Series Operations

Operation and features specific to the LAN5 series.

Chapter 2 LAK Series Controller User's Guide

1. Product Specification and Operation Environment

Specifications and operating conditions for LAK Series controllers.

2. System Overview

Diagrams illustrating system configurations for LAK series.

LAK2B/LAK2BN Series System Overview

LAK2D Series System Overview

LAK2J (DC-IN) Series System Overview

LAK2J (AC-IN) Series System Overview

LAK4 Series System Overview

LAK4D Series System Overview

LAK4N Series System Overview

LAK6B Series System Overview

Chapter 3 Installation Guide

1. Actuator and Controller Connector Installation

Guide for connecting actuator and controller connectors, ensuring IP class.

2. LAK2J Installation

Step-by-step guide for installing LAK2J.

LAN5 and LAK4D Installation Step 1

LAK4D Fixer Installation

LAK4D Fixer Release

LAN1 and LAK4N Installation

LAK4N Fixer Installation

LAFS Pedal Switch Installation

Chapter 4 Basic Operation Guide

1. Actuator and Controller Matching

Matching key boxes with actuators and controllers.

2. Actuator Extension Operation

Operation: Pressing the 'A' key extends the actuator tube.

LAP4G Use Guide

Actuator End Limit Stop Function

External Limit Stop Function

Controller Over Current Protection

5. Caution Notice

6. LAKC Over Current Protection Box

1. Specification and Operation Environment

Specifications and operating conditions for LAKC Over Current Protection Box.

2. LAKC-1 Installation Guide

Guide for installing the LAKC-1 over current protector.

3. Operation Guide

How to operate the LAKC Over Current Protection Box.

4. Notice: LAKC Wiring

Chapter 3 Sealed Lead Acid Batteries User's Guide

1. Battery Specification

Technical specifications for sealed lead acid batteries.

1. Operation Environment

Recommended operating conditions for batteries.

2. Battery Life

Information on battery lifespan for standby and cycle usage.

2. Battery Power Depletion Chart

Chart showing battery capacity depletion over time and temperature.

3. Battery Charging Guide

1. LAK2B, LAK2BN, LAK4N Charging

Charging guide for LAK2B, LAK2BN, and LAK4N batteries.

2. LAK2J Charging

Charging guide for LAK2J batteries.

3. LAK6B Charging

Charging guide for LAK6B batteries.

4. Charging Method

Method for charging batteries with constant voltage and current.

4. Installation of Battery on Controller

1. LAK2B/LAK2BN Installation

Guide for installing batteries on LAK2B/LAK2BN controllers.

5. Battery Notice

Chapter 4 LA Series Products Wiring & Installation

1. Linear Actuator Motor Wiring

Wiring specifications for LA Series linear actuator motors.

2. Reed Switch Specification & Application Circuitry

1. Feature (Common-open Type)

Features and specifications for common-open reed switches.

Common-close Type (optional)

Features and specifications for optional common-close reed switches.

2. Circuit Diagram

Application circuit diagrams for reed switches.

3. PLC Example

1. Low-level Control

Example of low-level control using PLC.

2. High-level Control

Example of high-level control using PLC.

3. Audio Connector Wiring for Read Switch

Wiring details for LA actuator read switch audio connector.

4. Positioning Feedback Device Wiring

1. LAS2, LAS3 Optical Sensor and Potentiometer Feedback

Wiring for optical sensor and potentiometer feedback on LAS2/LAS3.

1.1 Bare Wire for Optical Sensor

Bare wire specifications for optical sensors.

1.2 4-pin Connector for Optical Sensor

4-pin connector specifications for optical sensors.

1.3 Specification of Positioning Feedback (Optical Sensor)

1.4 Bare Wire for Potentiometer

2. LAN1 Positioning Feedback (Hall Sensor)

Specification of Positioning Feedback (Hall Sensor)

3. LAN2 Positioning Feedback (Hall Sensor)

4. Positioning Feedback for LAN3 Potentiometer

5. LAN5 Positioning Feedback (Hall Sensor)

6. LAC1 Positioning Feedback (Hall Sensor) and Potentiometer

6.1 Bare Wire for Positioning Feedback (Hall Sensor)

Bare wire specs for LAC1 Hall sensor feedback.

6.2 Specification of Positioning Feedback (Hall sensor)

Specifications for LAC1 Hall sensor feedback.

7. LAC3 Positioning Feedback (Hall Sensor) and Potentiometer

7.1 Bare Wire for Positioning Feedback (Hall Sensor)

Bare wire specs for LAC3 Hall sensor feedback.

7.2 Specification of Positioning Feedback (Hall sensor)

Specifications for LAC3 Hall sensor feedback.

Chapter 5 LAK\LAP Wiring and Installation

1. LAP1/LAP2 Wiring

Wiring details for LAP1/LAP2 with LAK2/LAK2D.

2. LAP3 Wiring

2.1. For LAK2B

Wiring specifications for LAP3 with LAK2B controller.

2.2. For LAK2J

3. LAP3N Wiring

4. LAP4/LAP4M/LAP4R Wiring

5. LAP4G Wiring

6. LAP4N/LAP4M/LAP4R Wiring

7. LAP5 Wiring

7.1. For LAK6B

Wiring specifications for LAP5 with LAK6B controller.

7.2. For LAK2J

8. Connector Drawings

1. KEYPAD DIN Drawings

Keypad DIN connector drawings for various LAK/LAN series.

2. Motor DIN Drawings

Chapter 6 Appendix

1. Label Description

Explanation of labels found on controller and linear actuator.

2. IP rank Description

Chapter 7 Product use in Medical Bed

1. Special features

Highlights specific features for medical bed applications.

LAN5 and LAK4D Installation Step 1

LAK4D Fixer Installation Step 2

LAK4D Fixer Release Step 3

LAK4D Fixer Release Step 4

3. Handset Description

(1) Operate the Handset

Instructions for operating handset buttons for adjustments.

(2) Locking Function

4. Cleaning and disinfecting

5. Checklist of product

6. Label