Hiwin LAS3-1 User Manual

1
A99UE13-1304
*The contents of this user`s manual are subject to change without notice. If you are
experiencing any technical difculties or do not understand the contents of this manual,
please contact our technical representative or local distributors for assistance.
CONTENTS
Chapter 1
Linear Actuator LA Series User's Guide
1. Product Specication and Operation Environment
.............................................. 5
2. Installation Guide
......................................................................................... 7
3. Caution Notice
............................................................................................ 9
4. Linear Actuator with Quick-Release User's Guide
............................................... 10
Chapter 2
LAK Series Controller User's Guide
1. Product Specication and Operation Environment
.............................................. 12
2. System Overview
......................................................................................... 18
3. Installation Guide
......................................................................................... 23
4. Basic Operation Guide
.................................................................................. 29
5. Caution Notice
............................................................................................ 31
6. LAKC-1 Over Current Protection Box
............................................................... 32
Chapter 3
Sealed Lead Acid Batteries User's Guide
1. Battery Specication
..................................................................................... 35
2. Battery Power Depletion Chart
........................................................................ 35
3. Battery Charging Guide
................................................................................. 36
4. Installation of Battery on Controller
.................................................................. 36
5. Battery Notice
............................................................................................. 38
Chapter 4
LA Series Products Wiring & Installation
1. Linear Actuator Motor Wiring
.......................................................................... 39
2. Reed Switch Specication & Application Circuitry
............................................... 41
3. PLC Examples
............................................................................................ 42
4. Positioning Feedback Device Wiring
................................................................ 43
Chapter 5
LAK\LAP Wiring & Installation
1. LAP1/LAP2 Wiring
....................................................................................... 54
2. LAP3 Wiring
............................................................................................... 56
3. LAP3N Wiring
............................................................................................. 58
4. LAP4/LAP4M/LAP4R Wiring
.......................................................................... 59
5. LAP4G Wiring
............................................................................................. 60
6. LAP4N/LAP4M/LAP4R Wiring
........................................................................ 61
7. LAP5 Wiring
............................................................................................... 62
8. Connector Drawings
..................................................................................... 64
Chapter 6
Appendix
1. Label Description
........................................................................................ 66
2. IP rank Description
...................................................................................... 67
Chapter 7
Product use in Medical Bed
.............................................................................. 68
Important Notes and Operating Safety Regulation:

Hiwin LAS3-1 Specifications

General

Series	LAS3
Control axes	1
Communication interface	RS-485
Power supply	24 VDC
Output Current	3 A
Protection Class	IP20
Storage Temperature	-20°C to 70°C
Operating Temperature	0°C to 50°C

Summary

Chapter 1 Linear Actuator LA Series User's Guide

1. Product Specification and Operation Environment

Details product specifications and operating conditions for LA actuators.

2. Installation Guide

Step-by-step instructions for actuator installation.

3. Caution Notice

Important warnings and precautions for safe operation.

4. Linear Actuator with Quick-Release User's Guide

Guide for using the quick-release feature on linear actuators.

Chapter 2 LAK Series Controller User's Guide

1. Product Specification and Operation Environment

Details product specifications and operating conditions for LAK controllers.

2. System Overview

Provides a general overview of the system architecture.

3. Installation Guide

Step-by-step instructions for controller installation.

4. Basic Operation Guide

Instructions for basic operation of the controller.

5. Caution Notice

Important warnings and precautions for controller use.

6. LAKC-1 Over Current Protection Box

Information on the over current protection box.

Chapter 3 Sealed Lead Acid Batteries User's Guide

1. Battery Specification

Technical specifications for sealed lead acid batteries.

2. Battery Power Depletion Chart

Chart showing battery capacity depletion over time.

3. Battery Charging Guide

Instructions on how to charge the batteries.

4. Installation of Battery on Controller

Guidance on installing batteries onto the controller.

5. Battery Notice

Important notices and precautions regarding battery usage.

Chapter 4 LA Series Products Wiring & Installation

1. Linear Actuator Motor Wiring

Wiring diagrams for linear actuator motors.

2. Reed Switch Specification & Application Circuitry

Specs and circuits for reed switches.

3. PLC Examples

Examples of PLC integration.

4. Positioning Feedback Device Wiring

Wiring for positioning feedback devices.

Chapter 5 LAK\LAP Wiring & Installation

1. LAP1/LAP2 Wiring

Wiring details for LAP1/LAP2.

2. LAP3 Wiring

Wiring details for LAP3.

3. LAP3N Wiring

Wiring details for LAP3N.

4. LAP4/LAP4M/LAP4R Wiring

Wiring details for LAP4/LAP4M/LAP4R.

5. LAP4G Wiring

Wiring details for LAP4G.

6. LAP4N/LAP4M/LAP4R Wiring

Wiring details for LAP4N/LAP4M/LAP4R.

7. LAP5 Wiring

Wiring details for LAP5.

8. Connector Drawings

Diagrams of various connectors.

Chapter 6 Appendix

1. Label Description

Explanation of labels on the product.

2. IP rank Description

Explanation of IP protection ratings.

Chapter 7 Product use in Medical Bed