A99UE13-1304
4
12.Type of protection of applied parts against electric shock is BF.
13.The temperature of Products under storage and transmission is -10℃~+50℃.
14.The clean method of product：Alcohol（70%）.
15.The procedure of the broken product：Recycle by local rules.
16.The product should be installed in a safe place where is allowed to take off the
plug easily in an emergency situation.
17.Cycle of inspection (every six months).
18.The hospital bed cleaning procedure must depend on actuator water-proof level
while actuator has assembled with hospital bed.
WARNING：Do not modify this equipment without authorization of the manufacturer.
WARNING：If this equipment is modied, appropriate inspection and testing must be
conducted to ensure continued safe use of the equipment.
WARNING: Read all warnings.
WARNING: Read this manual and follow it carefully before using the device.
WARNING: Remove the power supply cord when the unit is being moved to avoid
damage to the power supply cord.
WARNING: Do not use the unit in the presence of flammable anesthetics or other
flammable substances in combination with air, oxygen-enriched
environment, or nitrous oxide.
WARNING: Keep children away from the device.
WARNING: Before cleaning, turn off the unit and disconnect the power supply cord from
the AC power supply.
WARNING: Always ensure that the supply voltage meets the factory set voltage and
frequency range, as provided on the equipment.
To Next Page
Loading...
Need help?
General
