Hix SubliPro - Page 11

11
USING HIX SUBLIMATION WRAPS
a) Remove mug from oven
b) Press thumbs against the bottom lip
of the “loop end.”
c) Pressindexngersagainstthe top
edge of the “hook end.”
d) With one motion, press thumbs up
andindexngersdown.Thiswillre-
lease the mug from the wrap.
e) Place mug in room temperature wa-
ter to cool mug and stop sublimation
process.
CAUTION: Wrap will be hot use care when applying wrap to another mug.
It is recommended to allow wrap to cool before using again.
INCREASING THE LIFE OF YOUR WRAP:
The following actions will increase the life of your wrap and help to prevent
premature failure.
- Space your mugs at least 2” apart in oven, this will allow for more
evenheatingandairowbetweenmugs.Alsothiswillpreventmugs
from banging together reducing the life of your wrap.
- Do not drop or bang mugs with wraps together. This can cause
small tears in your wrap leading to tearing of the wrap.
- Only use on items the wrap is rated for; the standard HMWIII is de-
signedforboth11ozand15ozmugs.Useofthesewrapsforanything
else may shorten the life of the wrap and could result in damage such
astearing.Forunusuallysizedorshapeditemspleaseutilizeawrap
custom made for your application.
- Sharpngernailsandringscansnare/tearawrap.
If the above procedures are followed and care is taken when handling these
wraps you should expect to get hundreds of cycles from your HMWIII.
5. REMOVE AND COOL:
CAUTION: Wearheatprotectiveglovestohandlethenishedwrapsand
mugs.