HJC SMART 50B - Page 13

2 INSTALLING THE HEADSET ON YOUR HELMET
SMART HJC 50B 2
nd
Gen Premium Motorcycle Bluetooth
®
Communication System for HJC Helmets | 13
3. Put the remaining wire into the gap under the helmet’s rubber
guard.
4. Tighten the two long screws until the Bluetooth Module is fastened
firmly to the helmet.
2.1.6 Microphone Installation
• Modular or Open Face Microphone Installation
1. Insert the Wired Boom Microphone’s long hook into the groove in
the EPS of the helmet first and then insert the short hook.
2
1