HJC SMART 50B - 7.2 Starting Mesh Intercom

7 MESH INTERCOM
SMART HJC 50B 2
nd
Gen Premium Motorcycle Bluetooth
®
Communication System for HJC Helmets | 33
7. 2 Starting Mesh Intercom
When Mesh Intercom is enabled, the SMART HJC 50B will
automatically connect to nearby SMART HJC 50B users and allow them
to talk to each other by pressing the M Button.
Mesh Intercom On
=
1x
TAP
Blinking
“ Mesh intercom on,
Open Mesh,
channel 1”
Mesh Intercom Off
=
1x
TAP
“ Mesh intercom off”
7.3 Using the Mesh in Open Mesh
When Mesh Intercom is enabled, the headset will be in Open Mesh
(default: channel 1) initially.
7.3.1 Channel Setting (Default: channel 1)
If the Open Mesh communication experiences interference because
other groups are also using channel 1 (default), change the channel.
You can select from channels 1 to 9.
1. Double tap the M Button.
=
2x
TAP
“ Channel setting, 1”
2. Navigate between channels.
(1
2 ••• 8 9 Exit 1 •••)
=
1x
TAP
or
=
1x
TAP
“#”