Need help?Do you have a question about the HK Audio PR:O 10 XA and is the answer not in the manual?
General| On/off switch | Yes |
|---|---|
| Product color | Black |
| Housing material | MDF |
| Recommended usage | Universal |
| Suitable for outdoor use | - |
| Speaker type | 2-way |
| Driver diameter | 254 mm |
| Speaker position | Front |
| Tweeter diameter | 25.4 mm |
| Number of drivers | 2 |
| Speaker enclosure | Closed |
| Speaker placement | Floor |
| Audio output channels | 1.0 channels |
| Number of tweeter drivers | 1 |
| Tweeter diameter (imperial) | 1 \ |
| Subwoofer driver diameter (imperial) | 10 \ |
| Amplifier class | D |
| Amplifier output power | 600 W |
| Impedance | 8 Ω |
| Frequency range | 89 - 19000 Hz |
| RMS rated power | - W |
| Connectivity technology | Wired |
| Power source type | AC |
Weight and Dimensions| Depth | 290 mm |
|---|---|
| Width | 320 mm |
| Height | 480 mm |
| Weight | 13900 g |
Overview of the primary control knobs and their functions for PR:O series speakers.
Instructions for connecting the PR:O active cabinets to audio sources and other speakers.
Guidelines for powering on, initial setup, and safe operation of PR:O active speakers.
Adjusting volume and EQ settings for microphone and line signals.
Utilizing DuoTilt™ and curving cable for optimal speaker alignment and aiming.
Details on the controls and features specific to the PR:O 18 Sub A and PR:O 210 Sub A subwoofers.
Guidance on connecting subwoofers to mixers and other speaker systems.
Instructions for powering on and operating the PR:O subwoofer cabinets safely.
Adjusting bass volume and crossover frequency settings for subwoofers.
To Next Page