Need help?Do you have a question about the HK Audio PR:O 8 A and is the answer not in the manual?
General| Amplifier Type | Class D |
|---|---|
| LF Speaker | 8" woofer |
| Horn Characteristics | 90° x 60° |
| Pole Mount | Yes |
| Enclosure | Polypropylene |
| Type | Active 2-way speaker |
| Power Output | 800 W |
| Frequency Response -10 dB | 50 Hz - 20 kHz |
| Max. SPL @ 10% THD | 126 dB |
| Woofer Size | 8 inches |
| HF Driver | 1 x 1" |
| Tweeter | 1.4" Compression Driver |
| Crossover Frequency | 2.5 kHz |
| Audio Connectors Input | XLR, Jack |
| Inputs | XLR, Jack |
| Audio Connectors Output | XLR |
| Outputs | XLR (Link) |
| Equalization | EQ switch |
| Rigging Points | M10 |
| Grille | Steel |
General safety guidelines for the proper use and installation of loudspeaker systems and accessories.
Details on how to register your product to extend warranty coverage and product registration.
Description of input gain, tone control, mic/line switch, and input/through connectors.
Guidance on connecting mixers, microphones, and other speakers to the active cabinets.
Instructions for powering on, setting initial levels, and connecting other components.
Details on adjusting volume with Gain knob and using Tone control for music or speech.
Information on using DuoTilt™™ and curving cables for optimal speaker aiming and mounting.
Explanation of controls like Gain Bass, X-Over Bass, and Phase switch for subwoofer units.
Guidance on connecting mixers and satellites to subwoofer units, including line out and through ports.
Instructions for powering on, setting initial levels, and connecting components for subwoofer operation.
To Next Page