Need help?Do you have a question about the HK Audio VC 1200 and is the answer not in the manual?
General| Amplifier Channels | 2 |
|---|---|
| Output Power (4 Ohms) | 2x 600 W |
| Output Power (8 Ohms) | 2x 350 W |
| Output Power (Bridge 8 Ohms) | 1200 W |
| Power Output | 1200 W |
| Frequency Response | 20 Hz - 20 kHz |
| Protection Circuits | DC |
| Connectors Input | XLR |
| Connectors Output | Speakon NL4 |
| Output Impedance | 4Ω, 8Ω |
| Dimensions (W x H x D) | 483 x 88 x 380mm |
Details the function of the power switch and its integrated fuse.
Explains how to adjust the output volume using the gain control.
Information on CLIP, SIGNAL, and PROTECT indicator lights.
Details on balanced XLR and 1/4" jacks for inputs and binding posts for outputs.
Explains MONO, STEREO, and BRIDGE modes available on the amplifiers.
Information on ground strap, impedance display, and limiter function.
Instructions for setting up the VC 2400 in bridge mode.
Details on the amplifier's internal protection circuitry.
Guidance on air filter installation and power consumption.
Procedure and precautions for installing the amplifier in a rack.
Crucial safety instructions and warnings for using the amplifier.
Official statement of product compliance with relevant standards.
To Next Page
