Need help?Do you have a question about the HK Audio VX 2402 and is the answer not in the manual?
Description of the mains switch with integrated fuse and MAINS power indicator LED.
Explanation of how to use the gain control for desired maximum output volume.
Indicates signal peaks exceeding dynamic headroom; requires gain reduction if illuminated.
Indicates an incoming signal for each channel (A and/or B).
Indicates active energy management or external faults like short circuits.
Details on balanced XLR and stereo 1/4" jacks for inputs, enabling parallel connections.
Description of binding posts for speaker connection and phase assignments.
Procedure for removing ground strap to eliminate ground hum.
Explanation of the selector button for mono and stereo modes.
Selector switch functions for mono, stereo, and bridge modes.
Information on impedance settings and indicator LEDs.
Details on the switchable peak limiter for speaker protection.
Overview of protection features for power amps and connected equipment.
Instructions for installing and maintaining the air filter kit.
Average current consumption values for VC models.
Precautions for installing the power amp in a 19" rack for safety and ventilation.
Procedure for setting up the VC 2400 in bridge mode with specific cables.
To Next Page
General