EasyManua.ls Logo

HMC HG-50 User Manual

HMC HG-50
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
(Form: CE-014a-01)
HG-50/HG-80
OPERATING MANUAL
Be sure to read this operation manual carefully and handle it properly.
WARNING
!
Question and Answer IconNeed help?

Do you have a question about the HMC HG-50 and is the answer not in the manual?

HMC HG-50 Specifications

General IconGeneral
BrandHMC
ModelHG-50
CategoryLaboratory Equipment
LanguageEnglish

Summary

Safety Precautions and Warnings

Hazardous Materials Not to Sterilize

Lists substances that should not be sterilized, categorized by hazard type.

Operation Panel and Controls

Chapter 2: Installation

Installation Site Requirements

Specifies environmental conditions and clearance needed for safe and proper installation.

Installation Procedure

Step-by-step guide covering initial setup, connections, and final checks.

Chapter 3: Operation Method

Loading Substances and Precautions

Guidelines and safety notes for placing items inside the chamber.

Setting and Adjusting Parameters

Guide on modifying sterilization temperature, time, and other operational settings.

Reservation and Starting Operation

How to schedule automatic starts and initiate the sterilization process.

Chapter 9: Unloading Procedures

Safe Unloading Precautions

Critical safety warnings and steps for safely opening the lid and removing contents.

Chapter 10: After Completion of Operations

Chapter 11: Interrupting Operation

Chapter 13: Operation of Cycles

Chapter 4: Maintenance and Service

Chapter 5: Specifications

Chapter 6: Troubleshooting

Error Detection and Alarms

Lists common error codes, their problems, and recommended remedies.

Early Troubleshooting Guide

Provides solutions for common issues like no display, no exhaust, or leaks.

Related product manuals