HMC HG-80 - User Manual

(Form: CE-014a-01)
HG-50/HG-80
OPERATING MANUAL
● Be sure to read this operation manual carefully and handle it properly.
WARNING
!

Summary

Read Carefully Before Using

Chapter 1. What is the Autoclave HG-50?

Operation Panel

Main Operational Controls

Covers power, lid, start, stop, and cycle selection switches for basic operation.

Parameter Adjustment Controls

Chapter 2. Installation

1. Installation Instructions

Guidelines for proper equipment placement and environmental considerations.

2. Installation Procedure

Steps for filling cooling tank, securing casters, and connecting power supply.

Chapter 3. Operation Method

3. Loading Substance

Guidelines for safely placing items into the chamber for sterilization.

4. Selection of Cycle and Program

5. Changing Set Values

Procedure for customizing sterilization temperature, time, and other parameters.

6. Changing Function Setting

8. Starting Operation

Instructions on initiating the sterilization cycle and troubleshooting startup issues.

9. Unloading

Procedures for safely removing sterilized items from the chamber.

13. Operation of Cycles

Chapter 4. Maintenance and Service

Chapter 5. Specifications

Chapter 6. Troubleshooting

1. Error Detection (Alarms)

Explains error codes, their problems, and recommended remedies for malfunctions.

2. Early Troubleshooting

Provides solutions for common symptoms like display issues or leakage.

HMC HG-80 Specifications

General

Temperature Range	Ambient +5°C to 80°C
Capacity	80 Liters
Shelves	2
Power Supply	220V, 50Hz
Control System	Microprocessor PID controller
Display	LED
Model	HG-80
Material	Stainless Steel (Interior)
Application	Laboratory use