HMDX Jam Fusion - Bluetooth Pairing; Pairing a Single Headphone

Pairing a Single Jam Fusion Headphone
1. Make sure your device has Bluetooth
®
capability.
2. Make sure Jam
2
pairing switch is in single position (see Fig. 2).
3. Press and hold power button for 5 seconds; indicator will
begin to flash.
4. Pair your device with the unit by selecting Jam Fusion from
your Bluetooth
®
listings.
5. Press play and use controls on the unit to adjust desired
volume, forward to next track or repeat track.
NOTE:
• Once you have successfully paired your device, you may not
need to repeat the above steps. Please ensure the AUX cable is
unplugged and your device has been Bluetooth
®
enabled.
• When pairing with a computer, please consult your computer manufacturer
for Bluetooth
®
pairing instructions and/or the latest Bluetooth
®
Drivers.
• A pairing code is not required.
2
FIG. 2