HMDX Jam Fusion - Advanced Connectivity; Pairing Two Headphones

Pairing 2 Jam Fusion Headphones
1. Pair one headphone to your device by following the single
pairing instructions.
2. Move the Jam
2
pairing switch to the Jam
2
position on first
headphone (see Fig. 3).
3. On the second headphone, move Jam
2
switch to the Jam
2
position and power on.
4. The Bluetooth
®
indicator light will flash quickly until the units are
paired. Once paired you will hear a hint tone and the Bluetooth
®
indicator will slowly flash blue.
NOTE: Jam
2
indicator will flash white when successfully paired.
Listening to your device through Auxiliary Line-In Audio Jack
1. Connect AUX cable to the headphone or line-out jack of an audio device
and plug the other end of the cable into the line-in audio jack on the unit.
2. Press PLAY on device and use device controls to adjust volume or
FWD/RVS tracks.
2
FIG. 3