Need help?Do you have a question about the HME DX100 and is the answer not in the manual?
General| Brand | HME |
|---|---|
| Model | DX100 |
| Category | Intercom System |
| Language | English |
Details safety guidelines for RF exposure, antenna separation, gain, and mounting for compliance.
Provides a visual example of a typical theatrical application for the DX100 system.
Lists all standard equipment provided with the DX100 Wireless Intercom System.
Lists optional accessories and adapters available for the DX100 system.
Describes the controls and indicators of the DX100 base station.
Describes the controls and indicators of the DX100 beltpac unit.
Details the controls and indicators of the WH200 wireless headset.
Details the controls and indicators of the WS200 wireless speaker station.
Provides instructions for connecting the AC power supply to the battery charger and charging batteries.
Details antenna and power setups for the base station, including interference avoidance.
Explains how to avoid interference by selecting specific frequency bands for the base station.
Details how to expand the system's user capacity using multiple HME Base Stations.
Outlines the process for designating primary and secondary base stations and setting them up.
Provides steps to initialize each base station for interference-free operation in a multi-base setup.
Instructions for physically setting up Beltpac units before the registration process.
Step-by-step guide for registering Beltpacs to a specific base station.
Instructions for physically setting up WH200 Headset units before registration.
Step-by-step guide for registering WH200 Headsets to a specific base station.
Provides instructions for setting up the WS200 Speaker Station for wall mounting or table top.
Instructions for operating the WS200 Speaker Station using AC power.
Details how to operate the WS200 Speaker Station using batteries.
Step-by-step guide for registering WS200 Speaker Stations to a specific base station.
Details the controls and indicators of the DX100 base station during operation.
Explains the low battery indicator on the base station and its meaning.
Explains how to power on/off and operate the Beltpac unit in different modes.
Describes the function of ISO and IC buttons for communication modes.
Instructions for adjusting volume and microphone gain on the Beltpac unit.
Provides instructions for changing the battery in the Beltpac unit.
Explains how to power on/off and operate the WH200 headset in different modes.
Describes the function of ISO, IC1, and IC2 buttons for communication.
Instructions for adjusting volume and microphone gain on the WH200 headset.
Provides instructions for changing the battery in the WH200 headset.
Details how to connect a headset to the WS200 Speaker Station.
Instructions for setting the WS200 Speaker Station to PTT or HF modes.
Explains the routine power on/off and basic operation of the WS200 Speaker Station.
Describes the function of ISO and IC buttons for communication.
Covers call light function and microphone gain/sidetone adjustments for WS200.
Details battery replacement and auxiliary speaker connection for WS200.
Addresses issues like no power light, green lights not appearing, and registration failures.
Provides solutions for interference from cordless phones and issues after power outages.
Lists the technical specifications for the DX100 Base Station, including transmitter/receiver.
Details technical specifications for the transmitter and receiver modules of the base station.
Lists the technical specifications for the Beltpac and WH200 Headset units.
Lists the technical specifications for the WS200 Speaker Station.
Information regarding the disposal of electronic equipment according to WEEE directive.
To Next Page
