Need help?Do you have a question about the HME DX200 and is the answer not in the manual?
General| Audio Quality | Full Duplex |
|---|---|
| Type | Wireless Intercom System |
| Power Supply | Rechargeable Battery |
| Weight | 1.3 kg |
| Display | LCD |
Identifies all standard equipment included with the DX200 system for checking.
Details the controls and indicators of the Beltpac unit.
Details the controls and indicators of the WH200 headset unit.
Details the controls and indicators of the WS200 speaker station.
Details the front and rear panel controls and indicators of the base station.
Instructions for connecting the AC adapter and charging batteries for the system.
Step-by-step guide for connecting and setting up the base station.
Procedures for setting up and registering wireless devices with the base station.
Connecting and configuring intercom and external audio equipment.
Connects and configures a 2-wire intercom system with the base station.
Connects and configures a 4-wire intercom system with the base station.
Connects and configures external audio sources or equipment to the base station.
Connects and configures an external 8-ohm speaker to the base station.
Describes the operation of the base station's front panel controls and indicators.
Details how to operate the Beltpac unit, including power, modes, and controls.
Details how to operate the WH200 headset unit, including power, modes, and controls.
Details how to operate the WS200 speaker station, including connections and modes.
Lists the technical specifications for the base station, beltpac, and speaker station.
Technical specifications for the DX200 base station.
Technical specifications for the DX200 Beltpac.
Technical specifications for the DX200 WH200 Headset.
Technical specifications for the DX200 Speaker Station.
To Next Page
