HME ION IQ Operation

For more detailed operating instructions, go to www.hme.com/userManuals.cfm
For HELP call HME Technical Support at 1-800-848-4468 or Fax (858) 552-0172
Drive-Thru Communication System
HME# 400G665F
Rev A 4/8/11
BELT-PAC AND HEADSET OPERATION:
Talk to customers – A1 or A2
Talk to crew – B
Volume up – ▲ or Λ
Volume down
– ▼ or V
Power on/off
– PWR or red button
Mode
Mode
Setup
Single
Lane
Operation
Dual
Lane
Operation
Crew Talk
COMMUNICATOR
®
STATUS: With power off ● Press A2 + (▼or V) + Power ● Release buttons
CHANGE BATTERY:
If you hear “Battery low” or “Change battery” ─
Press battery-release button and remove battery
Place battery in battery-charger for recharging
Install fully charged battery in belt-pac or headset
One-Touch Hands Free Push To Talk Auto Hands Free
With power off
Press (▲orΛ) + B + Power
Release buttons
With power off
Press (▼orV) + B + Power
Release buttons
With power off
Press (▲orΛ) + (A1/A2) + Power
(A1 for Lane 1 – A2 for Lane 2)
Release buttons
In this mode,
press and release A1 or A2
button to talk to customer
In this mode,
press and hold A1 or A2 button
to talk to customer
In this mode,
talk to customer
without pressing buttons
Customer arrives
Alert tone in headset
Touch-Release A1 or A2
Speak/Listen to customer
Touch-Release A1/A2 or B
Communication ends
Customer arrives
Alert tone in headset
Press & hold A1 or A2
Speak to customer
Release to listen
Customer arrives
Alert tone in headset
Speak/Listen to customer
Touch-Release A1/A2 or B
Communication ends
In Tandem operations, Order Taker #1 uses the A1 button for
customers at order point #1 and Order Taker #2 uses the A2
button for customers a order point #2 t
In Tandem operations,
only Order Taker #1 can operate
in the Auto Hands Free mode
Customer arrives
Alert tone in headset
1 beep = Lane 1
2 beeps = Lane 2
Touch-Release A1 for Lane 1
Touch-Release A2 for Lane 2
Touch-Release opposite button
to change lanes
Speak/Listen to customer
Touch-Release A1/A2 or B
Communication ends
Customer arrives
Alert tone in headset
1 beep = Lane 1
2 beeps = Lane 2
Press & hold A1 for Lane 1
Press & hold A2 for Lane 2
Speak to customer
Release A1/A2 to listen
Customer arrives
Alert tone in headset
1 beep = Lane 1
2 beeps = Lane 2
Speak/Listen to customer
Touch-Release A1/A2 or B
Communication ends
With power off
Press B + A2 + Power
Release buttons
Touch-Release B to
speak/listen to crew
Touch-release B again
Communication ends
With power off
Press B + A2 + Power
Release buttons
Press & hold B to speak to crew
Release to listen
Battery-release
button (blue)
Battery
Battery-release
b
utton
Battery
Power on/off
(red button)

HME ION IQ Specifications

General

Brand	HME
Model	ION IQ
Category	Conference System
Language	English