EasyManua.ls Logo

Hobbywing FTX Evo30 - Notes on Battery Use

Hobbywing FTX Evo30
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
CHARGING/INSTALLING THE BATTERY
CHARGING/INSTALLING THE BATTERY.
• Always store your model with the battery pack unplugged
and removed.
• Always charge your battery away from the vehicle.
The included USB charger will take approximately 4 hours
to charge a discharged 2000mAh battery.
• When charging the Red LED will be solid.
• When the battery is fully charged the Green LED will be
solid.
• The battery will become warm to touch when charged, but
not hot.
• If the battery is hot, stop charging immediately. Disconnect
the battery from the charger as soon as the charger LED
turns green.
NOTES ON BATTERY USE:
• Always allow the battery cool after use, before recharging.
• Always inspect the battery before charging.
• Any bare wires, split heat shrink or leakage is a sure sign of
abuse.
• Never attempt to charge dead or damaged batteries.
• Do not disassemble the battery or cut the connector wires.
• If the battery connector gets hot enough to melt there is
most likely a serious problem with your model, driveline,
battery wires or speed controller. Find and correct the
problem before installing another charged battery pack.
• NEVER charge the battery unattended incase of
overcharging,
you need to be able to monitor the battery during charging.
• Charge away from ammable objects and on a non-f
ammable surface incase the battery becomes too hot.
BRUSHED EDITION ADDENDUM
EVO30 BR Addendum.indd 1 30/07/2024 09:15

Related product manuals